| sudoparent | fromparent, ofparent, asparent, parent, ofparent | If this attribute is set to `true`, the targeter will be parsed as if it was the [Parent][] of the casting entity executing the mechanic|
| sudoparent | fromparent, ofparent, asparent, parent, ofparent | If this attribute is set to `true`, the targeter will be parsed as if it was the [Parent][] of the casting entity executing the mechanic | |
| sudoowner | fromowner, ofowner, asowner, owner, ofowner | If this attribute is set to `true`, the targeter will be parsed as if it was the [Owner][] of the casting entity executing the mechanic |
| sudoowner | fromowner, ofowner, asowner, owner, ofowner | If this attribute is set to `true`, the targeter will be parsed as if it was the [Owner][] of the casting entity executing the mechanic | |
| sudotrigger | fromtrigger, oftrigger, astrigger, trigger, oftrigger | If this attribute is set to `true`, the targeter will be parsed as if it was the [Trigger][] of the skilltree executing the mechanic |
| sudotrigger | fromtrigger, oftrigger, astrigger, trigger, oftrigger | If this attribute is set to `true`, the targeter will be parsed as if it was the [Trigger][] of the skilltree executing the mechanic | |
In this example, [the mob will keep getting teleported in front of its owner](https://cdn.discordapp.com/attachments/523443579574681600/1101186712174088253/a.gif), since the `Forward` targeter is using the `sudoowner` attribute, and is, as such, getting parsed as if it was the owner of the casting mob executing the mechanic
In this example, [the mob will keep getting teleported in front of its owner](https://cdn.discordapp.com/attachments/523443579574681600/1101186712174088253/a.gif), since the `Forward` targeter is using the `sudoowner` attribute, and is, as such, getting parsed as if it was the owner of the casting mob executing the mechanic
| useboundingbox | bb | If the targeter is performing a distance check, this option allows it to check against the bounding box of the target instead of the center of its hitbox |
| useboundingbox | bb | If the targeter is performing a distance check, this option allows it to check against the bounding box of the target instead of the center of its hitbox | |
| unique | u | The maximum number of times an entity can be targeted. Defaults to 1, disable with 0. This is mostly used for meg models with multiple hitboxes |
| unique | u | The maximum number of times an entity can be targeted. Defaults to 1, disable with 0. This is mostly used for meg models with multiple hitboxes | |
| nomegbb | nmb | Whether MEG sub hitboxes should be filtered out |
| nomegbb | nmb | Whether MEG sub hitboxes should be filtered out | |
| xoffset | xo, x | Centers the offset on the x axis |
| xoffset | xo, x | Centers the offset on the x axis | |
| yoffset | yo, y | Centers the offset on the y axis |
| yoffset | yo, y | Centers the offset on the y axis | |
| zoffset | zo, z | Centers the offset on the z axis |
| zoffset | zo, z | Centers the offset on the z axis | |
| forwardOffset | foffset, fo | Centers forward and backward offset, based on the caster's viewing angle |
| forwardOffset | foffset, fo | Centers forward and backward offset, based on the caster's viewing angle | |
| sideOffset | soffset, so | Centers left and right offset, based on the caster's viewing angle |
| sideOffset | soffset, so | Centers left and right offset, based on the caster's viewing angle | |
| rotatex | rotx | Rotation on the x axis |
| rotatex | rotx | Rotation on the x axis | |
| rotatey | roty | Rotation on the y axis |
| rotatey | roty | Rotation on the y axis | |
| rotatez | rotz | Rotation on the z axis |
| rotatez | rotz | Rotation on the z axis | |
| coordinatex | cx | Sets the x axis coordinate |
| coordinatex | cx | Sets the x axis coordinate | |
| coordinatey | cy | Sets the y axis coordinate |
| coordinatey | cy | Sets the y axis coordinate | |
| coordinatez | cz | Sets the z axis coordinate |
| coordinatez | cz | Sets the z axis coordinate | |
| length | | Multiplied the direction vector by the specified value |
| length | | Multiplied the direction vector by the specified value | |
| blocktypes | blocktype, bt | Only targets selected block types. Multiple blocks can be listed by separating them using a `,`<br>You can add a `#` at the front of the type to indicate that the block only needs to match part of the type, add `@` to indicate that the block only needs to match the start of the type |
| blocktypes | blocktype, bt | Only targets selected block types. Multiple blocks can be listed by separating them using a `,`<br>You can add a `#` at the front of the type to indicate that the block only needs to match part of the type, add `@` to indicate that the block only needs to match the start of the type | |
| blockignores | blockignore | Excludes selected block types from the targeter. Multiple blocks can be listed by separating them using a `,` |
| blockignores | blockignore | Excludes selected block types from the targeter. Multiple blocks can be listed by separating them using a `,` | |
| coordinateyaw | cyaw | Sets the yaw value |
| coordinateyaw | cyaw | Sets the yaw value | |
| coordinatepitch | cpitch | Sets the pitch value |
| coordinatepitch | cpitch | Sets the pitch value | |
| blockcentered | centered | Boolean value. If set to true, the center of the block at the target location will be targeted, instead of the target location itself |
| blockcentered | centered | Boolean value. If set to true, the center of the block at the target location will be targeted, instead of the target location itself | |
| faulty | | Whether the mechanic should use the old vector formula. Defaults to true |
| faulty | | Whether the mechanic should use the old vector formula. Defaults to true | |
